Order Entry and Processing is domain 4 of the PTCE content outline and carries 22.50% of the exam. It has four areas. The first one holds the pharmacy math, so that is where most of your study time should go.
Calculations, conversions and Sig codes
Area 4.1 covers reading a prescription and doing the math behind it.
Sig codes
The Sig is the directions line. These 25 codes come up constantly.
| Code | Meaning | Code | Meaning |
|---|---|---|---|
| po | by mouth | bid | twice a day |
| sl | under the tongue | tid | three times a day |
| pr | rectally | qid | four times a day |
| top | topically | q6h | every 6 hours |
| inh | inhaled | ac | before meals |
| IM | into the muscle | pc | after meals |
| IV | into the vein | hs | at bedtime |
| subcut | under the skin | prn | as needed |
| od | right eye | stat | immediately |
| os | left eye | gtt | drop |
| ou | each eye | ud | as directed |
| ad | right ear | ||
| as | left ear | ||
| au | each ear |
Memory aid: o is for the eye (ocular), a is for the ear (aural). d is right (dexter), s is left (sinister), u is both.
Example: “1 gtt ou bid” means instill 1 drop into each eye twice a day.
Conversion factors
| Measure | Equals |
|---|---|
| 1 kg | 2.2 lb |
| 1 lb | 454 g |
| 1 tsp | 5 mL |
| 1 tbsp | 15 mL |
| 1 fl oz | 30 mL |
| 1 in | 2.54 cm |
| °C | (°F − 32) × 5/9 |
| °F | (°C × 9/5) + 32 |
Quick check: 77°F is (77 − 32) × 5/9 = 45 × 5/9 = 25°C.
Write the units in every step. If the units cancel correctly, the setup is right.
Days supply
Days supply = total quantity ÷ amount used per day.
Tablets. Sig: 2 tabs po bid. Quantity: 120 tablets.
- Per day: 2 tablets × 2 = 4 tablets
- 120 tablets ÷ 4 tablets per day = 30 days
Insulin. Sig: 25 units subcut bid. Dispensed: one 10 mL vial of U-100 insulin.
- U-100 means 100 units per mL, so 10 mL × 100 units/mL = 1,000 units
- Per day: 25 units × 2 = 50 units
- 1,000 units ÷ 50 units per day = 20 days
Weight-based dose
A child weighs 44 lb. The order is 15 mg/kg per dose. The suspension is 250 mg per 5 mL.
- Weight: 44 lb ÷ 2.2 lb/kg = 20 kg
- Dose: 20 kg × 15 mg/kg = 300 mg
- Volume: 300 mg × (5 mL ÷ 250 mg) = 6 mL per dose
Convert pounds to kilograms first. Skipping that step is the most common mistake.
Percent strength
Percent means “per 100.”
- w/v: grams per 100 mL
- w/w: grams per 100 g
- v/v: mL per 100 mL
How many grams of dextrose are in 500 mL of dextrose 5% (w/v)?
- 5% w/v = 5 g per 100 mL
- 500 mL × (5 g ÷ 100 mL) = 25 g
Dilution
Use C1 × V1 = C2 × V2. C1 and V1 are the stock solution. C2 and V2 are what you want to make.
You need 500 mL of a 10% solution and you have a 50% stock.
- 50% × V1 = 10% × 500 mL
- V1 = (10 × 500 mL) ÷ 50 = 100 mL of stock
- Diluent: 500 mL − 100 mL = 400 mL
Alligation
Use alligation to mix a higher and a lower strength into one in between. Make 300 mL of a 40% solution from 70% and 20% stock.
Set up the grid with the higher strength top left, the lower bottom left and the target in the middle. Subtract diagonally.
| Stock | Target | Parts |
|---|---|---|
| 70% | 40 − 20 = 20 parts of the 70% | |
| 40% | ||
| 20% | 70 − 40 = 30 parts of the 20% |
- Total parts: 20 + 30 = 50
- 70% stock: (20 ÷ 50) × 300 mL = 120 mL
- 20% stock: (30 ÷ 50) × 300 mL = 180 mL
Check: 120 mL holds 84 units of drug and 180 mL holds 36. Together that is 120 in 300 mL, which is 40%.
IV flow rate and drip rate
Flow rate (mL/hr) = volume ÷ time.
An order is 1,000 mL over 8 hours.
- 1,000 mL ÷ 8 hr = 125 mL/hr
Drip rate (gtt/min) = mL per hour × drop factor ÷ 60 minutes. The drop factor is printed on the tubing package.
The same bag runs through tubing that delivers 20 gtt/mL.
- 125 mL/hr × 20 gtt/mL = 2,500 gtt/hr
- 2,500 gtt/hr ÷ 60 min/hr = 41.7 gtt/min
- Round to a whole drop: 42 gtt/min
Equipment and supplies
Area 4.2 covers the supplies that go out with a medication.
Insulin syringes. U-100 syringes are marked in units and come in three sizes.
| Syringe size | Holds up to |
|---|---|
| 0.3 mL | 30 units |
| 0.5 mL | 50 units |
| 1 mL | 100 units |
Pick the smallest syringe that holds the full dose. Smaller syringes have finer markings and are easier to read. A 45-unit dose fits best in a 0.5 mL syringe.
Needles. Gauge is thickness. The higher the gauge, the thinner the needle: a 31-gauge needle is thinner than a 25-gauge. Pen needles screw onto insulin pens and are used once.
Oral syringes. They measure liquid medicine in mL and cannot take a needle. Use them for small or odd volumes, such as 3.5 mL for an infant. They are more accurate than a household spoon. Never hand out an injectable syringe for an oral liquid.
Spacers. A spacer, or holding chamber, attaches to a metered-dose inhaler. It holds the puff so the patient can breathe it in slowly, and more drug reaches the lungs. It is especially useful for children. Spacers are not used with dry powder inhalers.
Diabetes testing supplies. Lancets prick the finger, test strips take the blood drop and the meter reads the strip. Strips must match the meter brand.
Lot numbers, expiration dates and NDC numbers
Area 4.3 covers reading a stock bottle.
NDC
The National Drug Code identifies a drug product. It has three segments.
| Segment | Identifies | Example |
|---|---|---|
| First | Labeler: the manufacturer, repackager or distributor | 12345 |
| Second | Product: drug, strength and dosage form | 6789 |
| Third | Package: size and type | 1 |
On the package the NDC has 10 digits, in one of three layouts. Billing systems need 11 digits in a 5-4-2 layout. To convert, add one leading zero to the segment that is one digit short.
| 10-digit layout | On the package | Add a zero to | 11-digit result |
|---|---|---|---|
| 4-4-2 | 1234-5678-90 | the first segment | 01234-5678-90 |
| 5-3-2 | 12345-678-90 | the second segment | 12345-0678-90 |
| 5-4-1 | 12345-6789-0 | the third segment | 12345-6789-00 |
The zero always goes at the front of the segment, never at the end.
Lot numbers
The lot number identifies one production batch. It is how you find affected stock in a recall, so it is recorded when you repackage or compound.
Expiration date vs. beyond-use date
| Expiration date | Beyond-use date (BUD) | |
|---|---|---|
| Set by | The manufacturer | The pharmacy |
| Applies to | The unopened product in its original container | A compounded, repackaged or reconstituted product |
| Based on | The manufacturer’s stability testing | USP standards and the product labeling |
An expiration date that shows only a month and year means the last day of that month. A bottle marked 08/2027 can be used through August 31, 2027.
A BUD can never be later than the manufacturer’s expiration date of any ingredient. When you add water to an antibiotic powder, the short date in the product labeling becomes the BUD that goes on the bottle.
Returns and non-dispensable stock
Area 4.4 covers what happens to product that will not be dispensed.
Return to stock. A filled prescription that the patient never picks up goes back to stock after the period set by pharmacy policy. The insurance claim is reversed. The patient label comes off or is covered, and the drug goes back with its lot number and expiration date intact.
Once it has left the pharmacy, it does not come back. A medication that has been in the patient’s hands cannot be returned to stock and dispensed again. The pharmacy can no longer vouch for how it was stored.
Rotating stock. Put the shortest-dated product in front so it is used first: first expired, first out. Pull outdated stock on a regular schedule, before the expiration date arrives, and keep it apart from sellable stock.
Non-dispensable product is quarantined in a marked area. That covers:
- Expired stock
- Recalled product
- Damaged goods, such as a crushed carton or a broken seal found at receiving
- Refrigerated items that arrived warm or sat outside the labeled temperature range
Credit returns. Unopened, in-date product that was ordered by mistake or arrived damaged can often be returned to the wholesaler for credit, under the wholesaler’s rules.
Reverse distribution. A reverse distributor takes expired and unsalable drugs, sends eligible items back to manufacturers for credit and arranges destruction of the rest. For controlled substances the reverse distributor must be registered with the DEA. Schedule II drugs are transferred on a DEA Form 222, and Schedule III–V drugs on an invoice.
Practice this domain
Work through these until the setups feel automatic:
Common questions
How much of the PTCB exam is pharmacy math?
Math sits in Order Entry and Processing, which is 22.50% of the content outline, about 18 of the 80 scored questions. The domain also covers Sig codes, supplies, NDC numbers and returns.
Can I bring a calculator to the PTCB exam?
No. Personal calculators are never allowed. The exam has one built in, and you can ask for a hand-held one if the test center has one available.
Last checked against the PTCB's documents in November 2026.